First 3D Printer

 On May,2022 I got my first 3D Printer its Creality Ender 3 v2, the spec its out there . It's not new, but it's perfectly in good condition until it's in my hand :p. The only problem that I'm facing is, in just 2 weeks I blown the control board :D (be careful when you try to tweak the stepper motor ampere!, read the manual first), no love lost... and the control board is an older version, and eventually sooner or later I have to replace it anyway and i ordered the new control board (Creality 4.2.7 control board). So, after a while learning and fascinating with the machine I got bored :D... so I decide to extending the build volume. After browsing around and counting the budget I decided to extend  the machine to 310x310 with belt driven system for the Z axis, cause the budget were tight and I can print some of the parts (you can google the parts : Ender 3 v2 Belt Driven and the part is on the Thingverse ).  Its on going right now... hope I'm not braking anything in the process :p 

Install GRBL on STM32F103 (3 AXIS CNC)

The easy way 

1. Download dan extract Yaroslav Vlasov  6-AXIS-USBCNC-GRBL

3. Find the hex file on Release folder 

2. Run STMCubeProgramer

3. Flash the STM32

Remember, the default parameter is 4 AXIS.

Note : 

1.the default 4-AXIS parameter is only work with USG Platform (Universal Gcode Sender) 

2. For flashing the hex file you can google it, there are many tutorial about it.

GRBL32 (STM32F103) Configuration PART-1

STM32F103

I'm using STM32F103 board, bought it from online shop. these are the Firmware (stm32grbl11_v2) it's 4 axis, got it form Jim's Embeddedtronic Flash it to STM32 using STM32 ST-LINK Utility using ST-LINK V2 Dongle (you can find abounded the tutorial about using it.