Ender 3V2

 Working on Voron 2.4, while my Ender 3V2 working perfectly fine.

First 3D Printer

 On May,2022 I got my first 3D Printer its Creality Ender 3 v2, the spec its out there . It's not new, but it's perfectly in good condition until it's in my hand :p. The only problem that I'm facing is, in just 2 weeks I blown the control board :D (be careful when you try to tweak the stepper motor ampere!, read the manual first), no love lost... and the control board is an older version, and eventually sooner or later I have to replace it anyway and i ordered the new control board (Creality 4.2.7 control board). So, after a while learning and fascinating with the machine I got bored :D... so I decide to extending the build volume. After browsing around and counting the budget I decided to extend  the machine to 310x310 with belt driven system for the Z axis, cause the budget were tight and I can print some of the parts (you can google the parts : Ender 3 v2 Belt Driven and the part is on the Thingverse ).  Its on going right now... hope I'm not braking anything in the process :p 

Install GRBL on STM32F103 (3 AXIS CNC)

The easy way 

1. Download dan extract Yaroslav Vlasov  6-AXIS-USBCNC-GRBL

3. Find the hex file on Release folder 

2. Run STMCubeProgramer

3. Flash the STM32

Remember, the default parameter is 4 AXIS.

Note : 

1.the default 4-AXIS parameter is only work with USG Platform (Universal Gcode Sender) 

2. For flashing the hex file you can google it, there are many tutorial about it.