Voron 2.4
I'm still having an issued when leveling the z gantry. The next thing i have in my mind were replacing with voron tap. Waiting for the electronics parts arrive.
The printed parts were ready.
8-April 2023 i bought optical endstop from Solarperfect. the idea is, desolder the part i need,..which is the sensor, added longer wire and connect again to the board and test it. All thought there is solid tutorial about it, finding the right sensor with the same type is the hard part... So i begin with the typical endstop and see if it work.
Stupid fact:
Took an hour or less to desolder the sensor carefully so i not damaging any thing on the process...and then you realize, you can took off the back plastic cover from it. The black plastic just a cover and the parts inside is the two sensor....duh!
Everything work fine and perfectly connected and waiting to the next phase.
09-April-2023
Waiting the MGN9 from chinaa.
15-Apr-2023
MGN9 arrived. Assamble the part, then i notice the sensor board blocking the toolhead.
Pending progress.
I've to resolder and rewiring the sensor, print another voron-tap model and buy 6mm and 5mm flat headed hex screw.
